Polycom RMX DOC2551A - Manual (Page 12)

12
20 Click Next.
21 In the Span Definition dialog box, define the following parameters:
Num Plan Select the type of signaling (Number Plan) from the
list according to information given by the service
provider.
Default: ISDN
Note: For E1 spans, this parameter is set by the
system.
Net Specific Select the appropriate service program if one is used
by your service provider (carrier).
Some service providers may have several service
programs that can be used.
Default: None
Dial-out Prefix Enter the prefix that the PBX requires to dial out.
Leave this field blank if a dial-out prefix is not required.
The field can contain be empty (blank) or a numeric
value between 0 and 9999.
Default: Blank
Field Description
Framing Select the Framing format used by the carrier for the
network interface from the list.
• For T1 spans, default is SFSF.
• For E1 spans, default is FEBE.
Side Select the RMX side on the network.
Default: User side
Note: If the PBX is configured on the network side,
then the RMX unit must be configured as the user
side, and vice versa, or both must be configured
symmetrically.
Field Description