Polycom DVD 729 - Manual (Page 19)

19
3139 246 12911
Setup Menu
Analogue Audio Setup menu
This menu contains setup options for your
analog audio output, such as DOWNMIX, D.R.C.
(Dynamic Range Compression), Sound Mode
and Reverb Mode etc. which makes the setup
system reproduce high quality surround sound.
1 Press SYSTEM MENU.
2 Press the 34 keys to highlight the ANALOG
OUTPUT SETUP.
3 Press OK to confirm.
DOWNMIX mode
1 Press the 34 keys to highlight the DOWNMIX.
2 Enter its submenu by pressing the
2 key.
3 Move the cursor by pressing the
34 keys to
highlight the selected item.
0 LT/RT
➜ This option should be used only if your DVD
Player is connected to a Dolby Prologic decoder.
0 STEREO
➜ This option will downmix Dolby Digital
signals directly into analogue stereo from L/R
sockets.
4 Press OK.
5 Press the
1 key to return to the ANALOG
OUTPUT SETUP menu.
D.R.C. (Dynamic Range
Compression)
The DVD Player will compress the dynamic
range of its sound output for late-night listening.
1 Press the
34 keys to highlight D.R.C.
2 Enter its submenu by pressing the
2 key.
3 Move the cursor by pressing the
34 keys to
highlight the selected item.
➜ ON: Enable D.R.C.
➜ OFF: Disable D.R.C.
4 Press OK.
5 Press the
1 key to return to the ANALOG
OUTPUT SETUP menu.
Sound Mode
The SOUND MODE allows you to select from
various preset mode that control the sound
frequency to optimize certain musical styles. It
greatly enhances the excitement and enjoyment
of your favourite music.
1 Press the 34 keys to highlight the SOUND
MODE.
2 Enter its submenu by pressing the 2 key.
3 Move the cursor by pressing the 34 keys to
highlight the selected item.
➜ OFF: Playback a disc in original sound effect.
4 Press OK.
5 Press the 1 key to return to the DIGITAL
OUTPUT SETUP menu.
01-28 DVD728 Eng 18/03/2003, 5:41 PM 19