Polycom DVD 729 - Manual (Page 9)

9
3139 246 12911
Connecting to an Audio System
1 You can also listen to the sound of audio CDs
and DVD video discs by connecting to an
optional stereo system.
2 Connect the Left and Right AUDIO OUT on the
DVD Player to the Left and Right AUDIO IN on
the stereo system.
COAXIAL
OPTICAL L
R
VIDEO TV OUT
CVBS VIDEO IN RIGHT
AUDIO IN
Back
of TV
LEFT
AUDIO IN
TV IN SCART
STEREO
TO Stereo
AUDIO IN
TO TV
VIDEO IN TO TV
SCART IN
OR
TV
DVD
Connecting to Optional
Equipment
● A digital component with a built-in MPEG 2 or
Dolby Digital™ decoder allows you to enjoy the
surround sound while producing the effect of
being in a movie theater or a concert hall.
● The Player outputs the surround sound signals
from the DIGITAL OUT COAXIAL or
OPTICAL connectors.
If your receiver has a MPEG 2 or Dolby
Digital™ decoder,
1 Connect the COAXIAL or OPTICAL DIGITAL
AUDIO OUT of the DVD Player to the
COAXIAL or OPTICAL DIGITAL AUDIO IN on
your receiver.
COAXIAL
OPTICAL L
R
VIDEO TV OUT
CVBS VIDEO IN
Back
of TV
TV IN SCART
TO TV
VIDEO IN TO TV
SCART IN
OR
DVD
TV
COAXIAL IN
AV Receiver
OPTICAL IN OR
TO Digital
AV Receiver
DIGITAL AUDIO IN
Notes:
– If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a distorted sound or no
sound at all.
– To see the selected audio format of the
current DVD in the Setup Menu, refer to “Setup
Menu”.
Preparation
01-28 DVD728 Eng 18/03/2003, 5:41 PM 9