Quantum Data 881 - Manual (Page 220)

202 Chapter 7 Working with Images
To view an alternate version for an image in the Content list:
1. Select an image by pressing the Content key.
2. Enable and view the alternate image version as follows:
a. Press the Options key. The following menu appears on the generator’s display for
images with a single, alternate image:
b. Choose the Alternate item by pressing the adjacent soft key until a + appears next
to the item.
3. Toggle back and forth between the images by pressing the soft key adjacent to
Alternate.
To view multiple image versions in the Content list:
1. Select an image by pressing the Content key.
2. Enable and view image versions as follows:
a. Press the Options key. The following menu appears on the generator’s display:
b. Choose the More item by pressing the adjacent soft key until a + and Rendition
appears next to the item.
c. Press the + and - keys to advance through the image versions.
Alternatively, to enable and view image versions using the command line interface,
enter the following commands:
ISUB 1 // Enables sub images
IVER 1 // Specifies the first image version
IMGU // Activates the image version
-Alternate
Red+
-NoGamma Green+
-Noise Blue+
+Alternate
Red+
-NoGamma Green+
-Noise Blue+
-More
Red+
-NoGamma Green+
-Noise Blue+
+More Rendition: 000
Red+
-NoGamma Green+
-Noise Blue+