To monitor the aux channel transactions on the, Displayport, To monitor the – Quantum Data 881 User Manual
Page 524: Aux channel transactions on the displayport
506
Chapter 15 Auxiliary Channel Analyzer
// Applies the interface setting to the generator
To monitor the aux channel transactions on the DisplayPort:
1. Set up the generator/analyzer for DisplayPort in accordance with the instructions above
To set up the generator for DisplayPort:
2. Set up the Auxiliary Channel Analyzer in accordance with the instructions in “
3. In the ACA, from the
File menu, select Connect to Analyzer. The Connect to
Analyzer dialog box appears.
4. In the
Connect To box, enter the IP address of the generator you want to connect to,
and then click
Connect.
5. From
DisplayPort menu, point to Port, and the select the AUX-MON DP you want to
monitor as shown below:
6. From the
File pull down menu specify New Trace or click on the new trace icon.
7. Click the
Capture activation button.