TechniSat HD S2X - Manual (Page 44)

8.1.2.1 Manual programming of timer
> Use the Menu key to call up the Main menu.
> Use the arrow keys up/down to mark the line Manage timer.
> Confirm by pressing OK.
The sub-menu Manage Timer will be displayed.
> Use the arrow keys up/down to select the desired Timer type.
> Press the OK key to go to the entry window used for programming a new Timer
event.
Programme
> Use the arrow keys to mark the upper line of the menu.
> Press the OK key.
> In the selection window that is now displayed, use the arrow keys up/down to
select the desired source (TV or Radio).
> Confirm by pressing OK.
Now, depending on the previous setting, the TV resp. the radio programme list will be
displayed.
> Now use the arrow keys to mark the desired programme.
> Use the arrow keys up/down to move around the list one line at a time.
> Use the arrow keys left/right to move backward or forward in the list one page at
a time.
> Press the OK key to accept this into the timer.
Date
> Use the arrow keys to mark the column Date.
> Use the numeric keys to enter the date (4-digit format) of the Timer event.
Start
> Use the arrow keys to mark the column Start.
> In this line, use the numeric keys to enter the starting time for the timer.
Stop
> Repeat the steps as described under “Start” to enter the stopping time (except for
channel-switching timer).
Repeat
> Use the arrow keys to mark the column Rep.
> Press the OK key.
A selection window will be displayed, showing various repeat options.
1x Timer on once
T Daily repeat
1 W Repeat once a week
1-5 Repeat only on weekdays
44
8