TechniSat HD S2X - Manual (Page 78)

Accept all programmes
> To accept and transfer all new programmes without a further check, press the yellow
function key Automatic.
The programmes will be added to the Favourites list in accordance with
predetermined criteria
Reject programme (do not accept)
> If you do not wish to accept the indicated programme, and all the following
programmes into the Main Favourites list, press the red function key No.
9.5.4 Updating software
In addition, you have the facility of updating the operating software of your digital receiver via
satellite (ASTRA 19° East).
> Use the arrow keys up/down to mark the line Update software.
> Press the OK key to go to the Software update submenu.
> To perform a software update, use the up/down arrow keys to mark the line
Update.
> Use the OK key to set the software update to on.
> In the line Update time use the numeric keys to set the time at which the
software is to be updated.
Note:
For the new software to be loaded automatically, the digital receiver must be
set to standby mode. The downloading procedure will be indicated by the
message “Update S” as well as the percentage of data already downloaded.
Do not interrupt this procedure by switching the receiver on or off.
Software channel
If the parameters of the data channel required for downloading the ISIPRO have changed,
you can correct them in this menu as described under Point 9.4.4 (manual programme
search). Current transponder data can be obtained from your retailer. Generally, under
normal circumstances you should not make any changes in this menu.
Start availability test manually
> To check for the presence of new software manually, press the yellow function key
Check.
If new software is available, a note will appear.
Start update
> To download the software, use the up/down arrow keys to mark the Start
update field and confirm with OK.
Your receiver will then restart, and will indicate the presence of new software by
displaying a message.
9.5.4.1 New software available
Independently of whether you have switched the automatic updating function on or off, the
receiver will check each time you switch it on whether a new version of the operating
78
9