TOA Electronics M-9000 - Manual (Page 73)

73
Setting Range
1 – 32, LAST (including only Events set for ROUTE or BASE)
Setting Item
Event Activation at Power-On
[When the function selection is set to EVENT]
[When the function selection is set to VERSION]
[When the function selection is set to MEMORY]
Displays the firmware version number.
Restore all current settings to the default settings.
Setting Range
REMOTE1, REMOTE2
OFF, INPUT1 – 8, OUTPUT1 – 2 (Max. 8 when 3 T-001Ts are used)
(Default: REMOTE1 terminal for OUTPUT1 control, REMOTE2
terminal for OUTPUT2 control)
Setting Item
Remote Volume Terminal Number
Remote Volume Control Channel
[When the function selection is set to REMOTE]