Visioneer Patriot 680 - Manual (Page 134)

S CANNING WITH THE W INDOWS I MAGE A CQUISITION 127
6. Adjust settings of the previewed image as desired:
■ Change the button selection for the type of image.
■ Adjust the custom settings; refer to the next section, “Fine
Tuning Your Scans”.
■ If you’re scanning from the Flatbed, change the size of the
scanned image. To do this, click and hold the mouse pointer over
one of the four sizing-boxes on the corners of the previewed
image. Then drag the box to increase or decrease the size of the
image.
7. Preview the image again. When you are satisfied with the image,
click the Scan button.
8. The scanned images will appear in Microsoft Paint (or other
TWAIN application you’re using).