Visioneer Patriot 680 - Manual (Page 86)

C ONFIGURING THE O NE T OUCH B UTTONS 79
3. Select the scan configuration Configure Before Scan.
4. Right-click on Configure Before Scan and choose an interface to
use for configuring before scanning.
Some interface options may not be available, based on the drivers
you installed for your scanner.
TWAIN—The TWAIN Interface opens for you to configure the
scanning. See “Scanning with the TWAIN Interface” on page 107.
ISIS—The ISIS Scan interface opens for you to configure the
scanning. See “Scanning with the ISIS Interface” on page 130
WIA—The Windows Image Acquisition Interface (WIA) opens for
you to configure the scanning. See “Scanning with the Windows
Image Acquisition” on page 125.
5. Click OK or Apply on the OneTouch Properties window.
Note: The WIA option is only available if your computer is running
Microsoft Windows XP.
Click the arrows to
select the button.
Select Configure
Before Scan.
Right-click on
Configure Before Scan
to get the menu, and
choose the interface to
use for configuring.