Visioneer Patriot 680 - Manual (Page 35)

28 V ISIONEER P ATRIOT 680 S CANNER U SER ’ S G UIDE
2. Check the LED number to make sure you are using the scan setting
you want.
To choose a new scan setting, press the Up or Down Destination
Selector buttons.
3. To scan a one-sided document, press the Simplex button.
To scan a two-sided document, press the Duplex button.
A scan progress window opens and, when scanning is finished, the
image is sent either to the selected Destination Application from
the OneTouch utility, or to a folder for storing scanned documents.
Press the Up or Down Destination Se-
lectors to cycle through the scan settings
to select the one you want.
The current scan setting. See “Check
the Scan Settings Before Scanning” on
page 30 to check the settings.
Cancel
button Pause
button