Asus RS726Q-E7/RS12 User Manual
Page 138
Advertising
6-20
Chapter 6: RAID configuration
Using the Objects command
To check data consistency using the Objects command
1. From the Management Menu, select Objects, and then select Virtual Drive
from the sub-menu.
2. Use the arrow keys to select the virtual drive you want to check, and then press
<Enter>.
3. Select Check Consistency from the pop-up menu, and then press <Enter>.
4. When prompted, use the arrow keys to select Yes from the dialog box to check
the drive.
5. When checking is complete, press any key to continue.
Advertising
This manual is related to the following products: