Asus RS726Q-E7/RS12 User Manual
Page 36
Advertising
Chapter 2: Hardware setup
2-16
5. Carefully insert the drive tray and
push it all the way to the depth of
the bay until just a small fraction of
the tray edge protrudes.
6. Push the tray lever until it clicks,
and secures the drive tray in place.
The drive tray is correctly placed
when its front edge aligns with the
bay edge.
7. Repeat steps 1 to 6 if you wish to
install other SATAII/SAS drive(s).
When installed, the SATAII/SAS connector on the drive connects to the SATAII/
SAS interface on the backplane.
Advertising
This manual is related to the following products: