2 replacing power supply units, Replacing power supply units -15 – Asus RS700D-E6/PS8 User Manual
Page 33
Advertising
2-15
ASUS RS700D-E6/PS8
3. Recover the rear cover. Press
down gently on the location above
the system fans to ensure proper
fan installation, as shown in the
right figure.
2.7.2
Replacing power supply units
Follow the steps below to replace the failed power supply unit (PSU).
To replace the failed PSU
1. Hold the PSU lever and press the
PSU latch.
2. Firmly pull the failed PSU out of the
server chassis.
3. Firmly push the new PSU into the
chassis until the latch locks to the
server chassis.
Advertising