3 raid controller selection, 4 setting the raid item in bios, Raid controller selection -3 – Asus RS700D-E6/PS8 User Manual
Page 93: Setting the raid item in bios -3
Advertising
ASUS RS700D-E6/PS8
6-3
6.1.3
RAID controller selection
You can choose either the LSI Software RAID Configuration Utility or the Intel
Matrix Storage Manager as the default utility to create RAID set(s). See 5. Intel
®
ICH10R SATA port S/W RAID setting on page 4-6 for details.
6.1.4
Setting the RAID item in BIOS
You must enable the RAID function in the BIOS Setup before creating RAID set(s)
using SATA HDDs. To do this:
1. Enter the BIOS Setup during POST.
2. Go to the Main menu > IDE Configuration, and then press <Enter>.
3. Set the Configure SATA as item to [RAID].
4. Save your changes, and then exit the BIOS Setup.
Refer to Chapter 5 for details on entering and navigating through the BIOS
Setup.
Advertising