Asus RS700D-E6/PS8 User Manual
Page 44
Advertising
Chapter 4: Motherboard information
4-6
5. Intel
®
ICH10R SATA port S/W RAID setting (3-pin RAID_SEL1)
This jumper allows you to select the Serial ATA RAID configuration utility to
use when you create disk arrays. Place the jumper caps on pins 1-2 if you
want to use the LSI
®
MegaRAID software RAID utility (default); otherwise,
place the jumper caps on pins 2-3 to use the Intel
®
Matrix Storage Manager
(IMSM).
4. LAN controller setting (3-pin LAN_SW1, LAN_SW2)
These jumpers allow you to enable or disable the onboard Intel
®
Intel
82574LGigabit LAN controllers. Set to pins 1-2 to activate the Gigabit LAN
feature.
Advertising