Asus Crosshair III Formula User Manual
Page 158
Advertising
4-34
Chapter 4: Software support
5. Browse the contents of the
RAID driver disk to locate the file
txtsetup.oem.
6. Double�click the file. A window
appears, allowing you to select the
program for opening the oem file.
8. Find the [HardwareIds.scsi.iaAHCI_ICH10R] and
[HardwareIds.scsi.iastor_ICH8RICH9RICH10RDO] sections in the
txtsetup.oem file.
9. Type the following line to the bottom of the two sections:
id = “USB\VID_xxxx&PID_xxxx”, “usbstor”
7. Use Notepad to open the file.
Add the same line to both sections.
The VID and PID vary with different vendors.
Advertising