Asus Crosshair III Formula - Manual (Page 89)

ROG Crosshair III Formula 3-15
3.3.13 Extreme OV [Disabled]
[Enabled] Enables the Extreme OV function.
[Disabled] Disables this function.
3.3.14 CPU Load-Line Calibration [Auto] Load-Line Calibration [Auto]
Allows you to select the CPU Load-Line mode.
[Auto]
BIOS automatically adjust the voltage.
[Disabled] Follows Intel specifications.
[Enabled] Improve CPU VDroop directly.
3.3.15 CPU Voltage [Auto]
Allows you to set the CPU VCore voltage.
Refer to the CPU documentation before setting the CPU Vcore voltage. Setting
a high VCore voltage may damage the CPU permanently, and setting a low
VCore voltage may make the system unstable.
3.3.16 CPU/NB Voltage [Auto]
Allows you to set the CPU/NB voltage. The values start from 0.8V with a 0.0125V
interval. The maximum supported voltage differs by CPU. The text color in The text color in
the configuration field indicates voltage condition. When you set the NB LED
Selection item to [North Bridge Voltage], the onboard northbridge LED displays
northbridge voltage condition.
3.3.17 DRAM VDDA Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 2.50425V to 3.20650V
with a 0.01325V interval.
3.3.18 DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.51050V to 2.80900V
with a 1.51050V interval.
3.3.19 HT Voltage [Auto]
Allows you to set the HT voltage. The values range from 1.20575V to 2.0075V with
a 1.20575V interval.