Asus Crosshair III Formula - Manual (Page 54)

2.7 I/O shield, LCD Poster
and Audio card Installation
1. Install the I/O shield to the chassis
by snapping it in place from inside.
2.7.1 I/O shield and LCD Poster Installation
2. Orient the motherboard and install
it to the chassis. Make sure that the
motherboard external ports fit the
I/O openings.
Be cautious when installing the motherboard. The I/O shield edge springs may
damage the I/O ports.
3. Thread the LCD Poster cable
through the back I/O shield opening
until the stopper fits the opening.
5. Place the LCD Poster on the
chassis or to wherever you like.
4. Locate and connect the LCD
Poster cable to the LCD_CON
connector.
The the photos above are for reference only, the actual I/O shield may differ by
models.
2-26 Chapter 2: Hardware information