Asus Crosshair II Formula - Manual (Page 51)

ASUS Crosshair II Formula 2-25
3. Thread the LCD Poster cable
through the opening until its
stopper snaps into place.
4. Plug the LCD Poster cable into
the onboard connector labeled
LCD_CON.
2.7.2 I/O shield and LCD Poster Installation
1. Install the I/O shield to the chassis
by snapping it in place from inside.
2. Orient the motherboard and install
it to the chassis. Make sure that the
motherboard external ports fit the
I/O openings.
5. Place the LCD Poster on the
chassis or to wherever you like.