Asus Crosshair II Formula - Manual (Page 90)

4-18 Chapter 4: BIOS setup
SLI-Ready Memory [Disabled]
Allows you to select SPD profile for SLI�Ready Memory
Configuration options: [Disabled] [Optimal] [High Performance] [High Frequency]
The following item becomes configurable when you set SLI-Ready Memory to
options other than �disabled��.
SLI-Ready Memory CPUOC �CPUOC 0%��
Allows you to select CPU overclocking percentage.
Configuration options: [CPUOC 0%] [CPUOC 1%] [CPUOC 2%]–
�CPUOC 13%�� �CPUOC 14%�� �CPUOC MAX��
Vcore Voltage [Auto]
Allows you to select the Vcore (CPU) voltage. The text color in the configuration
field corresponds to the onboard CPU L�D color, both of which indicate voltage
condition. Refer to page 2�1 for CPU L�D definition.
Configuration options: [Auto] [0.7750V] [0.7875V] [0.8000V] [0.8125V]–[1.9750V] –�1.9750V�� �1.9750V��
�1.9875V�� �2.0000V��
Write Data Timing Control [Auto]
Configuration options: [Auto] [No Delay] [1/96 M�MCLK delay] [2/96 M�MCLK
delay�� �3/96 MEMCLK delay��–�46/96 MEMCLK delay�� �47/96 MEMCLK delay��
DQS Receiver Enable Timing [Auto]
Configuration options: [Auto] [0 ps] [50 ps] [100 ps] [150 ps]–[8650 ps] [8700 ps]
Output Driver Control
CKE Drive Strength [Auto]
Configuration options: [Auto] [1.00x] [1.25x] [1.50x] [2.00x]
CS/ODT Drive Strength [Auto]
Configuration options: [Auto] [1.00x] [1.25x] [1.50x] [2.00x]
Add/CMD Drive Strength [Auto]
Configuration options: [Auto] [1.00x] [1.25x] [1.50x] [2.00x]
MEMCLK Drive Strength [Auto]
Configuration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]
Data Drive Strength [Auto]
Configuration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]
DQS Drive Strength [Auto]
Configuration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]
DRAM Drivers Weak Mode [Auto]
Configuration options: [Auto] [Normal] [Weak]
Current DRAM Timing
This value is detected automatically.