Asus A8V-E SE - Manual (Page 60)

2 - 1 8 2 - 1 8 2 - 1 8 2 - 1 8 2 - 1 8 C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p
Capacity Capacity Capacity Capacity Capacity
Displays the auto-detected hard disk capacity. This item is not
configurable.
Cylinder Cylinder Cylinder Cylinder Cylinder
Shows the number of the hard disk cylinders. This item is not configurable.
H e a d H e a d H e a d H e a d H e a d
Shows the number of the hard disk read/write heads. This item is not
configurable.
Sector Sector Sector Sector Sector
Shows the number of sectors per track. This item is not configurable.
PIO Mode PIO Mode PIO Mode PIO Mode PIO Mode
Sets the PIO mode for the IDE device.
Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3]
[Mode 4]
UDMA Mode UDMA Mode UDMA Mode UDMA Mode UDMA Mode
Disables or sets the UDMA mode. Configuration options: [Disabled] [Auto]
Transfer Mode Transfer Mode Transfer Mode Transfer Mode Transfer Mode
Shows the Transfer mode. This item is not configurable.
After entering the IDE hard disk drive information into BIOS, use a disk
utility, such as FDISK, to partition and format new IDE hard disk drives.
This is necessary so that you can write or read data from the hard disk.
Make sure to set the partition of the Primary IDE hard disk drives to
active.
2.3.5 2.3.5 2.3.5 2.3.5 2.3.5 HDD SMART Monitoring HDD SMART Monitoring HDD SMART Monitoring HDD SMART Monitoring HDD SMART Monitoring
Enables or disables the hard disk Self-Monitoring Analysis & Reporting
Technology (SMART) feature. Configuration options: [Disabled] [Enabled]
2.3.6 2.3.6 2.3.6 2.3.6 2.3.6 Installed Memory Installed Memory Installed Memory Installed Memory Installed Memory
Shows the size of installed memory.