Asus A8V-E SE - Manual (Page 62)

2 - 2 0 2 - 2 0 2 - 2 0 2 - 2 0 2 - 2 0 C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p
Selecting a very high CPU frequency may cause the system to become
unstable! If this happens, revert to the default setting.
Spread Spectrum [Auto]
Enables or disables the clock generator spread spectrum.
Configuration options: [Disabled] [Enabled] [Auto]
PCIEx clock Sync. to CPU [Enable]
Enables or disables the PCI Express™ synchronous clock to the CPU.
Configuration options: [Disabled] [Enabled]
PCIEx Clock [XXX] (value is auto-detected)
Allows you to set the PCI Express clock frequency. This item is
user-configurable only when the P C I E x c l o c k S y n c . t o C P U
P C I E x c l o c k S y n c . t o C P U P C I E x c l o c k S y n c . t o C P U P C I E x c l o c k S y n c . t o C P U P C I E x c l o c k S y n c . t o C P U item is
set to Disabled. The BIOS detects the default value of this item. Press
<Enter> then key-in desired PCI Express clock frequency within range.
PCI clock Sync. to CPU [Enable]
Enables or disables the PCI synchronous clock to the CPU.
Configuration options: [Disabled] [Enabled]
PCI Clock [XXX] (value is auto-detected)
Allows you to set the PCI clock frequency. This item is
user-configurable only when the P C I c l o c k S y n c . t o C P U
P C I c l o c k S y n c . t o C P U P C I c l o c k S y n c . t o C P U P C I c l o c k S y n c . t o C P U P C I c l o c k S y n c . t o C P U item is
set to Disabled. The BIOS detects the default value of this item. Press
<Enter> then key-in desired PCI clock frequency within range.
CPU Clock [XXX] (value is auto-detected)
Displays the frequency sent by the clock generator to the system bus
and PCI bus. The default value of this item is auto-detected by the
BIOS. Use the <+> and <-> keys to adjust the CPU frequency.
CPU Multiplier [Auto] CPU Multiplier [Auto] CPU Multiplier [Auto] CPU Multiplier [Auto] CPU Multiplier [Auto]
Sets the CPU multiplier. The configuration options vary depending on the
type of CPU installed. Configuration options: [Auto] [x4] [x4.5] [x5] [x5.5]
[x6] [x6.5] [x7] [x7.5] [x8] [x8.5] [x9] [x9.5] [x10] [x10.5] [x11]