IDEC DATAVS2 Series - Manual (Page 67)

Instruction Manual SVS2 Series
62
10. INSPECTION SELECTION
In order to change the current Inspection running on SVS you can choose between two options,
described in the following paragraphs: inspection selection through Graphic User Interface and
inspection selection through digital input.
10.1. Inspection selection through Graphic User Interface
When connected to the sensor, from the Menu Sensor select item Change Inspection:
The following SVS Settings dialog window will appear:
In the top view of the window you will see a table showing the current SVS memory slots status. Each
slot is represented by a table row, characterized by four columns: from left to right, the first three
columns represent the Slot Number, the Name of the Inspection stored in the corresponding Slot and
the Slot Status, containing a red led when an Inspection is stored in the corresponding slot or a green
led when the slot is empty. The last table column represent the SVS sensor current running
Inspection, corresponding to the checked row.
In order to change the current running Inspection you have to select the table row corresponding to
the Inspection you want to start running and press the Ok button, on the bottom right view of the dialog
window.
Pressing the Close button you will cancel the current action; the current running Inspection will not
change.