LevelOne WHG-1000 User Manual
Page 25
WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
25
Dynamic IP : This configuration type is applicable when the WAS-103R is connected to a network with the
presence of a DHCP server; all related IP information will be provided by the DHCP server automatically. If the
IP Address do not assigned from DHCP server, the system need manual connect to DHCP server.
Hostname : The Hostname of the WAN port
PPPoE : This configuration type is applicable when the WHG-1000 is connected to a network with the presence
of a PPPoE server.
User Name : Enter User Name for PPPoE connection
Password : Enter Password for PPPoE connection
MTU : MTU stands for Maximum Transmission Unit. For PPPoE connections, you may need to set the MTU
setting in order to work correctly with your ISP. Default is 1492 bytes.
PPTP : The Point-to-Point Tunneling Protocol (PPTP) mode enables the implementation of secure multi-
protocol Virtual Private Networks (VPNs) through public networks.
Username : Enter User Name for PPTP connection
Password : Enter Password for PPTP connection
PPTP Server IP Address : The IP address of the PPTP server
My WAN IP : The IP address of the WAN port