LevelOne WHG-1000 - Manual (Page 45)

WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
45
 Cipher Suite : Check on the respected button to enable either AES or TKIP cipher suites; default is
TKIP.
 Group Key Update Period : This time interval for re-keying GTK (broadcast/multicast encryption
keys) in seconds. Enter the time-length required; the default time is 600 seconds.
 Master Key Update Period : This time interval for re-keying GMK (master key used internally to
generate GTKs) in seconds. Enter the time-length required; the default time is 83400 seconds.
 Key Type : Check on the respected button to enable either ASCII or HEX format for the Pre-shared
Key.
 Pre-shared Key : Enter the information for pre-shared key; the format of the information shall
according to the key type selected.
Pre-shared key can be either entered as a 256-bit secret in 64 HEX digits format, or 8 to 63 ASCII
characters.
 WPA-Enterprise (or WPA2-Enterprise): The RADIUS authentication and encryption will be both enabled if
this selected. The WHG-1000 support two 802.1x Authentication/ Accounting RADIUS Server
 WPA General Settings :
 Cipher Suite : Check on the respected button to enable either AES or TKIP cipher suites.
 Group Key Update Period : This time interval for re-keying GTK (broadcast/ multicast encryption
keys) in seconds. Enter the time-length required; the default time is 600 seconds.