Vanguard ATRT-03_03B User Manual
Page 53
ATRT-03, ATRT-03A, AND ATRT-03B USER’S MANUAL
REV 7
47
3.6.4. Performing a Special Transformer Test
The ATRT-03 can test 67 transformer types defined by ANSI, CEI/IEC and Australian standards.
Follow the steps below to perform a test on one of these transformer types (See Appendix B, C,
and D for a list of supported transformer types and their corresponding special test numbers):
a. Start from the “START-UP” menu:
Press the
[1]
key (TEST XFMR).
b. The following screen will be displayed:
Press the
[6]
key (SP TEST).
c. The following screen will be displayed:
1. ENTER SP TEST NUM
Press the
[1]
key (ENTER SP TEST NUM) to enter the special test number. Please
see Appendix B, C, and D for a listing of all the transformer types.
The following screen will be displayed:
Type the test number using the alpha-numeric keypad and then press the
[ENTER]
key. Continue to step d.
ENTER SP TEST NUMBER
“ENTER” TO CONTINUE
#
SPECIAL TEST
1.ENTER SP TEST NUM
2.SCROLL TO SELECT
XFMR CONFIGURATION:
1.SNG PHS 2.dT-Y
3.Y-dT 4.dT-dT
5.Y-Y 6.SP TEST
1.TEST XFMR 08/23/10
2.SETUP 08:25:15
3.CALCULATOR
4.DIAG 5.QUICK TST