Vanguard ATRT-03_03B - Manual (Page 56)

REV 7 ATRT-03, ATRT-03A, AND ATRT-03B USER’S MANUAL
50
g. The Phase A test will be performed and the results will be displayed on the screen
temporarily as shown:
The following screen will then be displayed:
Follow the instructions displayed on the LCD screen and then press the [ENTER] key.
h. The Phase B and C tests will be performed and all results will be displayed on the screen
temporarily as shown:
Press any key to continue.
If using an ATRT-03 or ATRT-03A, continue to step i.
If using an ATRT-03B, continue to step k.
i. The following screen will be displayed:
Press the [1] key (YES) to print the test results.
j. The following screen will be displayed:
Press the [1] key (COLUMN) to print a columnar report (see Figure 20) or press the [2]
key (DETAILED) to print a detailed report.
PRINT FORMAT?
1.COLUMN
2.DETAILED
PRINT TEST RESULTS?
1.YES
2.NO
RATIO mA % DIFF
+100.04 0002
+100.06 0002
+100.05 0002
JUMPER H1-H2
“ENTER” to CONTINUE
Dy11 XFMR
+10.021 0011
PLEASE WAIT...