LT Security LTAL5300PM - Manual (Page 37)

7 Transferring line mode illumination of terminal units
network
1, Terminal equipment has two transferring line methods, one is split transferring line mode, the other is transferring line
mode of unity machine.
2, In split transferring line mode, communicating with upper computer only has two modes, one is TCP / IP, the other is
the RS485. Split transfer mode for networking mode of the split. The network connection process in split mode is network
input
⊇controller ⊇terminal unit. RS485 communicates directly with upper computer by terminal unit.
3、the transfer mode of unity machine is used in networking mode of unity machine and Wiegand. In the mode of unity
machine, it can communicate with upper computer by TCP/IP、RS485、RS232. When RS485 and RS232communicate
with upper computer, RS485 and RS232 can not be used at the same time
4、RS485can communicate with upper computer, at the same time, it can be used on back function. When user uses RS485
on back function, it can not be connected with upper computer.
7.1Connection mode chart of split transferring line
485A/TX+
485B/TX-
38