LT Security LTAL5300PM - Manual (Page 40)

Refuse to found
Fingerprint device refuses the registered fingerprint.
Permission rank
Serial fingerprint machine has 3 permission levels:
□ User：indicates those who need to establish identity because of some purpose, such as open the door though the
device, or record their in and out records
□ Administrator：Implements all other operation except carrying through advanced settings and register users that
they have power more than administrator (include administrator).
□ Super administrator：User that can visit all system functions and alter all settings of the system.
Explanation：registrar can register administrator and super administrator if having no registration of super
administrator, at the same time, if there is no super administrator, the administrator may register super administrator;
if have super administrator, the junior administrator can not register senior administrator.
Mode key
When using fingerprint, different event corresponds to different state, such as work sign in, off sign in, overtime sign
in, out, back etc states according to clock in conditions. It also can be divided into go-in, go-off states according to in
and out condition of door contact machine.
Some key board has 4 function key (F) or direction key, they all can be as state key to set current status. But these
modes are manual, when you need to use some status, you should press corresponding button. In order to reduce manual
operation, you may set transferring function (timing status), when arrive at some set time, the machine shall transfer into
current state and display in initial interface.
Message notification
It is divided into public and private message. Set on back-stage of System, and then upload to the fingerprint machine,
when start rolling machine, you can see the short message to the public about attendance, it is all along exist. After user
input validation fingerprint, there will prompt short message for private people so as to reduce the workload of staff and
greatly improve work efficiency.
Send message by aiming at somebody, If an employee’s birthday is on October 20, you can set up software in the
background on October 20 which issues to him a short message "Happy birthday to you", then upload to the machine,
after the staff validates the fingerprint authentication on that day, this message will be displayed on screen.
Send message by aiming at many people, such as hold company meeting on June 19, you can set up in the
background, then upload to the machine, and the screen shall display "about XX Conference, Room XX, please participate
at XX (time) on that day.
There are two ways for transmitting information, first, one is direct transmission by connecting back-stage system with
fingerprint machine, and the other is transmitted from the U disk.
41