Maintenance, Consumer advice – Vitrex 103500 User Manual

Page 8

Advertising
background image

Everest Road

Lytham St Annes

Lancashire

FY8 3AZ

Tel: +44 (0) 1253 789180

Fax: +44 (0) 1253 789182

www.vitrex.co.uk

Maintenance

• Always check the blade before use for

cracks or signs of damage.

• Ensure that the reservoir is filled up to the

recommended level. Do not overfill or

allow it to run dry.

• Always clean the machine after use, after

first ensuring that it is disconnected from

the mains.

• Rinse out reservoir thoroughly to remove

all sludge and wipe down outside of

machine using a cloth or sponge.

• When not in use, store the electrical cable

and plug under the machine in the space

provided.

• No other servicing is required in normal

use. No attempt should be made to repair

or replace internal components as this will

invalidate any claim whilst the product is

under guarantee.

Consumer Advice

• Do not dispose of electrical products

with your normal household waste.

• Always use recycling facilities

whenever possible.

• Additional recycling information can

be found through your local Authority

or Retailer.

Q.E.P. Co UK Ltd is committed to a continuing program of product improvement.

Consequently, please be advised that specifications, performance, appearance,

and dimensions of QEP/Vitrex products are subject to change without notice. For

more up-to-date information about our range of products, please contact our

Customer Service Office on +44 (0)1253 789180 or your local distributor.

• For further information or advice,

please call the Vitrex Technical Helpline

on +44 (0) 1253789180.

This electric tile cutter has been manufactured to a high quality standard. It is guaranteed against faulty materials and

workmanship for 12months from the date of purchase. Any claim must be accompanied by a valid till receipt as proof of purchase.

A faulty machine will either be repaired or replaced free of charge. If a direct replacement is not available, an alternative to the

same or greater value/specification will be offered.

This guarantee does not cover machine defects caused by or resulting from:

a) Misuse, abuse or neglect, b) Trade, Professional or hire use, c) Repairs attempted by anyone other than our authorised repair

agent, d) Ingress of foreign objects, substances or accident

In the unlikely event of a fault occurring, contact should be made through the Vitrex Technical Helpline +44 (0) 1253 789180

The above guarantee is only valid within the UK and does not affect your statutory rights.

The guarantor is Q.E.P. Co. UK Ltd., Everest Road, Lytham St. Annes, Lancashire, FY8 3AZ (Registered No. 04988177 England).

Advertising