Jenway 6715 - Manual (Page 31)

13
SeCtion 2 - Getting Started
2.1 UnPACKinG inStrUCtionS
• Refer to label 1 on carton exterior and
ensure instrument type and options/
accessories supplied are correct. Refer to
Distributor in the event of any discrepancy.
• Check each item as it is removed from
the packaging to ensure it is correct and
undamaged. Refer to Distributor if any item is
missing or damaged.
• Remove Documentation carton 2. Note
that this contains the Instruction Manual and
other important documents, which
MUSt
be retained for future reference. Other small
items (CD ROM, SD Card etc) will also be
found inside this carton.
• Please take some time to familiarise yourself
with the contents of the Instruction Manual
before using the instrument for the first time.
• Remove the cardboard packing piece 3 and
place to one side.
• Remove the two foam packing pieces 4 and
place these to one side.
• Grasp the instrument 5 (which will be sealed
in a polythene bag) firmly at each end, and lift
out of the carton to place on an adjacent flat,
firm and clean surface.
The instrument weighs approximately 10 Kgs.
PleASe tAKe CAre WHen liFtinG.
• Remove the Accessory carton 6. Note that
this contains the Power and USB cables
together with any sample cells or other items
that may have been ordered. Refer to the
Instruction Manual to ensure accessories are
installed correctly before using the instrument
for the first time.
Disposal of Packaging
it is recommended that the instrument packaging be retained for possible future long-term
storage or transportation. Please note that the Manufacturer or Distributor cannot be held
responsible for any damage incurred as a result of transportation of an inadequately packed
instrument.
2
3
4
5
6
1