Installing a drive module, Installing a drive module -58, Figure 4-4. installing a drive module -58 – HP Surestore 6.140 Tape Library User Manual
Page 164
Advertising
Understanding Errors and Troubleshooting
Removing and Replacing Drive Modules
Chapter 4
4-58
Installing a Drive Module
NOTE
It is not necessary to power off the library when inserting a replacement
drive module. However, do not insert your hand or foreign objects through
the empty drive bay and into the vertical lift assembly area.
1. Hold the drive module with one hand on the drive module handle
while the other hand supports the bottom (Figure 4-4).
2. Install the drive by inserting the rail at the top of the drive module
into the slot at the top of the drive module opening.
NOTE
Higher force will be required in the last half-inch of insertion to engage
the electrical connection.
Figure 4-4
Installing a Drive Module
Advertising