Modifynsm, Description, Syntax – HP StoreVirtual 4000 Storage User Manual
Page 84: Parameters
Description
Name
Postal city
[cityName]
Postal state
[stateName]
Postal country
[countryName]
Postal code
[postalCode]
Contact telephone number
[telephoneNumber]
The notification email.
[emailaddress]
Example 160 Windows
cliq modifyGroup login=10.0.1.2 userName=admin passWord=secret
node=10.0.1.2;10.0.1.3
Example 161 SSH
modifyGroup node=10.0.1.2;10.0.1.3
modifyNSM
Description
Modify storage system Fibre Channel port states between enabled and disabled.
Syntax
modifyNSM
{login=} { userName= passWord= | groupName= } {fcenabled=}
Parameters
Description
Name
The IP addresses or DNS-resolvable names of one or more storage systems.
{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
Enable or disable the Fibre Channel port(s). Values are 0—Disable and
1—Enable. The default is 0. If a WWPN is entered, this value will stay at
the default value of 0 unless specifically set by using this parameter.
{fcenabled}
84
Commands