HP StoreVirtual 4000 Storage - Manual (Page 94)

Description Name
• replication:2, parity:1 Network RAID-5 (Single parity)
•
replication:3, parity:2 Network RAID-6 (Dual Parity)
Values are 0—The volume does not use checksums and 1—The volume uses
checksums. [checkSum]
Enable or disable thin provisioning. Values are 0—The volume does not use
thin provisioning and 1—The volume is thin-provisioned (in a thinly
provisioned volume, reserve may be < length). [thinProvision]
The amount to grow the volume when it is thin-provisioned and new pages
must be added, based on the current growth rate. A value of 0 means no
autogrow. [autogrowSeconds]
The name of the cluster. [clusterName]
The size of the volume, with units specified as: [size]
• <n>KB—n Kilobytes (1024 bytes)
•
<n>MB—n Megabytes (1024 Kilobytes)
• <n>GB—n Gigabytes (1024 Megabytes)
•
<n>TB—n Terabytes (1024 Gigabytes)
•
<n>PB—n Petabytes (1024 Terabytes)
Automatically grow the pages. [autogrowpages]
Enable or disable adaptive optimization. Values are 0—Disable and
1—Enable. 1 is the default. [adaptiveOptimization]
Example 182 Windows
cliq modifyVolume description="New Description" login=10.0.1.2
userName=admin passWord=secret volumeName=TheVolume
Example 183 SSH
modifyVolume description="New Description" volumeName=TheVolume
mountVolume
Description
Mount a volume to the specified mount point.
CAUTION: Prior to mounting the volume, the volume must be assigned to the server
(assignVolume) and connected (connectVolume).
Syntax
mountVolume {groupName=} {volumeName=} {mountpoint=} [forcecreate=]
Parameters
Description Name
The name of the management group. {groupName}
The name of the volume in the management group. {volumeName}
94 Commands