HP StoreVirtual 4000 Storage - Manual (Page 88)

Description Name
The CHAP initiator secret for the volume. [initiatorSecret]
The IP address of the client server that has Application Aware Snapshot
Manager (AASM) installed on it. It will coordinate the snapshot with the [controllingserver]
applications using SAN volumes. This is required for managed snapshots of
Fibre Channel connected volumes. This is also required for VMware managed
snapshots; if applicable, enter the Virtual Center Server IP address.
Allow Fibre Channel ports to be assigned to the client. Values are 0—Disable
and 1—Enable. If volumes are attached to a client server via Fibre Channel [allowfcaccess]
and a value of 0 is entered, the client will lose its ability to communicate with
the attached volumes.
A semicolon delimited list of the unique World Wide Port Names for one or
more Fibre Channel ports. Expected WWPN formatting is 16 Hex characters [wwpn]
with or without the : character as a delimiter. For example:
20:21:00:0E:B3:01:AB:C6
or 2021000EB301ABC6. Lower case hex
characters a-f are also accepted.
The LUN (1–255) of the boot volume. Valid only for a Fibre Channel attached
volume. If present, then bootvolumename must also be specified.
NOTE: LUN 255 is not supported by Microsoft Windows.
[bootvolumelun]
The volume name of the boot volume. Valid only for a Fibre Channel attached
volume. If present, then bootvolumelun must also be specified. [bootvolumename]
Example 168 Windows
cliq modifyServer serverName=TheServer useCHAP=0
initiator=iqn.1991-05.com.microsoft:w-gregorio.corp.mynetworks.com
login=10.0.1.2 userName=admin passWord=secret
Example 169 SSH
modifyServer serverName=TheServer useCHAP=0
initiator=iqn.1991-05.com.microsoft:w-gregorio.corp.mynetworks.com
modifySite
Description
Modify a site in a multi-site SAN.
CAUTION:
•
This operation is irreversible.
•
This command will display a prompt, requiring confirmation before proceeding. This prompt
may be overridden with an optional prompt=0 parameter on the command line; in this case,
the command will always execute without pausing for confirmation.
Syntax
modifySite {login=} { userName= passWord= | groupName= } {siteName=} [node=]
[description=] [primary=]
88 Commands