HP StoreVirtual 4000 Storage - Manual (Page 102)

Description Name
The password for the storage system. Required when the userName
parameter is used. {passWord}
The aging in months. {aging}
Example 199 Windows
cliq setAlertsPolicy login=10.0.1.3 userName=admin passWord=secret
aging="2"
Example 200 SSH
setAlertsPolicy aging="2"
setAutoMountPolicy
Description
Set or modify the auto-mount policy or the mount location for auto-mount policies for the HP
StoreVirtual Recovery Manager application on this computer.
CAUTION: The HP StoreVirtual Recovery Manager must be installed on the system to implement
auto-mount polices defined by the CLIQ.
Syntax
setAutoMountPolicy [groupName=] [volumeName=] [retentionCount=] [mountPoint=]
[paused=]
Parameters
Description Name
The name of the management group [groupName]
The name of the volume in the management group. [volumeName]
The number of snapshots to keep mounted for the specified volume of the
auto-mount policy. This parameter is required when configuring the auto-mount
policy. [retentionCount]
Set the mount location on the host for where snapshots are mounted by the
HP StoreVirtual Auto-Mount service. This parameter is not required when
configuring an auto-mount policy. [mountPoint]
The state of the snapshot schedule. Values are 0—Schedule is not paused
and 1—Schedule is paused. [paused]
102 Commands