HP StoreVirtual 4000 Storage - Manual (Page 109)

Parameters
None
Example 218 Windows or SSH
cliq setTraceOn
shutdownGroup
Description
Perform a soft shutdown of a management group.
Syntax
shutdownGroup {login=} { userName= passWord= | groupName= }
Parameters
Description Name
The IP addresses or DNS-resolvable names of one or more storage systems. {login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters. {groupName}
The password for the storage system. Required when the userName
parameter is used. {passWord}
Example 219 Windows
cliq shutdownGroup login=10.0.1.2 userName=admin passWord=secret
Example 220 SSH
shutdownGroup
shutdownNsm
Description
Shut down a storage system.
CAUTION:
•
Shutting down a storage node may cause loss of access to volumes or degrade performance.
•
This command will display a prompt, requiring confirmation before proceeding. This prompt
may be overridden with an optional prompt=0 parameter on the command line; in this case,
the command will always execute without pausing for confirmation.
Syntax
shutdownNsm {login=} { userName= passWord= | groupName= } {action=} [delay=]
shutdownGroup 109