Getsnapshotinfo, Response syntax, Description – HP StoreVirtual 4000 Storage User Manual
Page 71: Syntax, Parameters
Description
Name
The password for the storage system. Required when the userName
parameter is used.
{passWord}
The name of the site.
[siteName]
Response Syntax
SITE ...
NSM ...
Description
Name
This section contains site information.
SITE
This section contains storage system information.
NSM
Example 132 Windows
cliq getSiteInfo siteName=TheSite login=10.1.2.3 userName=admin
passWord=secret
Example 133 SSH
getSiteInfo siteName=TheSite
getSnapshotInfo
Description
Get information about a snapshot.
Syntax
getSnapshotInfo
{login=} { userName= passWord= | groupName= } [snapshotName=]
[searchDepth=] [verbose=]
Parameters
Description
Name
The IP addresses or DNS-resolvable names of one or more storage systems.
{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
The name of the remote snapshot.
[snapshotName]
getSnapshotInfo
71