HP StoreVirtual 4000 Storage - Manual (Page 97)

Example 187 Windows
cliq recoverQuorum login=10.1.2.3 userName=admin passWord=secret
Example 188 SSH
recoverQuorum
removeSnapshot
Description
Disconnect a SAN snapshot from the host, then delete it. If the snapshot cannot be disconnected
(because it is in use, or for any other reason), it will not be deleted.
Syntax
removeSnapshot {login=} { userName= passWord= | groupName= } {snapshotName=}
Parameters
Description Name
The IP addresses or DNS-resolvable names of one or more storage systems. {login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters. {groupName}
The password for the storage system. Required when the userName
parameter is used. {passWord}
The name of the remote snapshot. {snapshotName}
Example 189 Windows
cliq removeSnapshot snapshotName=z: login=10.0.1.2 userName=admin
passWord=secret
removeVolume
Description
Disconnect a StoreVirtual volume from the host, then delete it. If the volume cannot be disconnected
(because it is in use, or for any other reason), it will not be deleted.
Syntax
removeVolume {login=} { userName= passWord= | groupName= } {volumeName=}
Parameters
Description Name
The IP addresses or DNS-resolvable names of one or more storage systems. {login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName
parameter instead of userName and passWord.
{userName}
removeSnapshot 97