Figure 6 – HP Tape Library Interface Manager Software User Manual
Page 46
Advertising
46 Management Operations
Chapter 3
Figure 6
Interface Manager Bus and Slot Locations
Note
Slot number1 should contain the RMC (disregard the card type
number 2 on the card, the correct slot number is 1). Slot number
2 should contain the Controller card (disregard the card type
number 3 on the card, the correct slot number is 2). Interface
cards are in slots numbered 3 through 12.
5. The upper right LED on the card should turn yellow. When it does, you can
remove the card.
Advertising