HP Tape Library Interface Manager Software - Manual (Page 68)

68 Management Operations Chapter 3
Figure 15 Interface Manager Interface Card Replacement-Online
6. Move the mouse over the image of the empty slot that you wish to place
[On-Line], then click on that image.
7. Select the [Put On-Line] button.
8. The Enter Administrator Password]window will appear. You will need to
enter the Interface Manager administrative password to continue.
A Current Status window will pop-up showing you the card is being
placed on-line.This process may take several minutes. When the card is
on-line, a second window will pop-up and show you that the card has
successfully been placed on-line.
9. Select the [Close] button (see Figure 16 ).
10. Wait for the RDY LED to turn green. It takes over one minute for the
interface card to reach that point in the boot up process.