HP StorageWorks 1510i Modular Smart Array - Manual (Page 46)

Assigning portals to the portal group
1. Select Portal Group > Assign Portals.
2. Expand the Port Name drop-down box and select the data port for this portal group to use.
3. Select the portals for this portal group to use.
NOTE:
• When assigning portals to a target's portal group, you are designating the path for
traffic to and from that target.
• Only IP addresses and portals associated with the selected data port are displayed.
• This example illustrates selecting two portals (on separate IP addresses) of data port
SA0.
4. When the display refreshes, expand (+) all components listed for the portal group and verify that the
newly assigned portals are shown in the component list.
46 Configure