HP XP20000XP24000 Disk Array - Manual (Page 107)

Using the Cross-Os File Exchange Software 4-13
Hitachi USP V Cross-OS File Exchange User’s Guide
• The File-Save command (Ctrl+S) saves the current FCU parameter definition
file. Deleted and replaced lines are discarded, inserted lines are added, and
all lines after end are discarded.
Note: This command does not save the current parameter set.
• The File-Save As… command saves the current FCU parameter definition file
with a different file name and/or location.
• The File-Exit command (Ctrl+X) exits the FCU software.
The Edit menu is reserved for future enhancement and is not yet enabled.
The Parameter menu provides access to the following FCU functions:
• The Parameter-Load command loads the Previous, Next, Top, and
Bottom parameter lines from the current FCU parameter definition file. The
FCU main panel status bar updates the current line number when any
Parameter-Load command is executed.
• The Parameter-Save command allows you to either Insert the parameter
set being displayed into the current FCU parameter definition file, or Replace
the current parameter set (previously loaded) with the parameter set being
displayed. If you do not select this command, your parameter changes will
not be saved.
Note: This command does not save the current FCU parameter definition
file (you must use File-Save/Save As).
• The Parameter-Delete command deletes the current parameter set from
the current FCU parameter definition file. The line is not permanently deleted
until you save the current FCU parameter definition file using the File-Save
command.
• The Parameter-Wipe command clears all FCU initiation parameters
displayed on screen, so that you can input new parameters easily. This
command does not delete the current parameter set.
The View menu provides access to the following FCU functions:
• The View-Toolbar and View-Status bar commands display/hide the FCU
toolbar and status bar.
• The View-Volume information… command opens the FCU Volume
Information panel, which displays the contents of the FX volume definition
file.
• The View-MF-file information… command displays the following
information for the mainframe (MF) files (datasets) in the volume specified in
the Mainframe file field on the FCU main panel.
• The View-Option… command opens the Option panel, which allows you to
view/change the FCU file transfer options.
• The View-Error information… command opens the Error Information panel.