Adding or removing external virus scan engines – HP StoreAll Storage User Manual
Page 347
Adding or removing external virus scan engines
The Antivirus software is run on external virus scan engines. You will need to add these virus scan
engines to the Antivirus configuration.
IMPORTANT:
HP recommends that you add a minimum of two virus scan engines to provide
load balancing for scan requests and to prevent the loss of scanning if one virus scan engine
becomes unavailable.
1.
On the Management Console, select Virus Scan Engines from the lower Navigator to open
the Virus Scan Engines panel, and then click Add on that panel.
2.
On the Add dialog box, enter the IP address of the external scan engine and the ICAP port
number configured on that system.
NOTE:
The default port number for ICAP is 1344. HP recommends that you use this port, unless
it is already in use by another activity. You may need to open this port for TCP/UDP in your firewall.
Adding or removing external virus scan engines 347