Mounting adapters, Accessories, Table 13 – Vaisala WMT700 User Manual
Page 30: Analog output configuration, Table 14, Table 15
User's Guide ______________________________________________________________________
Table 13
Analog Output Configuration
Selection
Cable type
1
No cables
2
Cable 2 m, cable connector, open leads on one end
3
Cable 10 m, cable connector, open leads on one end
4
MAWS cable 10 m
5
AWS520 cable 10 m. Shield connected to PE pin
6
Adapter cable for WS425 serial
7
Adapter cable for WS425 analog frequency output
8
RS485 cable 2 m, cable connector, open leads on one
end
9
RS485 Cable 10 m, cable connector, open leads on one
end
A
Adapter cable for WS425 analog voltage output
B
AWS520 cable 10 m. Shield not connected to PE pin.
C
ROSA analog cable 10 m, cable connector, open leads on
one end
D
Junction Box with Cable 2 m
E
Cable 15 m, cable connector, open leads on one end
F
Cable 26 m, cable connector, open leads on one end
Mounting Adapters
Ordering option 10 defines mounting adapters. There are several
different mounting adapters for different purposes, as shown in
Table 14 below.
Table 14
Mounting Adapters
Option
Adapter Type
A
Adapter 228869 only. Standard adapter, no fix
B
Adapter 228869 with WMT70FIX70 fixing mechanics. Also
suitable for inverted mounting. Standard adapter for
general purpose
C
Adapter 228869 with WMT700FIX60-POM. Standard
adapter with plastic fix for 60 mm pole
D
Adapter 228869 with WMT700FIX60-RST Standard
adapter with stainless steel fix for 60 mm pole
E
Adapter 22877 only (used for old WS425
FIX30/WS425FIX60), WS425-compatible adapter, no fix
NOTE
Ordering option 11 is reserved for future use.
Accessories
Ordering option 12 defines WMT700 accessories.
Table 15
Accessories
Option
Accessories
A
No accessories
B
Bird cage WMT70BirdKit
28 ___________________________________________________________________ M211095EN-E