Triton TritonMap - Manual (Page 47)

June 2004 DelphMap™ User's Manual
Reset to Factory Settings
If you are experiencing unexpected behavior from DelphMap, consider
choosing Reset to Factory Settings as a way out of the difficulty. If you
choose this, any settings you may have established in DelphMap during this
session or a previous session are overridden by the original factory settings.
Setting Properties for a Contact Type of Vector Layer
If you have a vector layer inserted and present in your imagery, certain
settings can also be viewed or applied to that layer. These settings differ
from the general settings described earlier in ‘General Settings Menu from
Main Menu’
. Moreover, the settings for contact layers and digit layers are
laid out differently in their respective dialog boxes. All vector types have the
same types of properties, however. Settings dialogs for contact and digit
layers are explained next.
To view file information for a contact type of vector layer
1. Right-click on a vector layer name in the Project Files window.
2. Choose
Properties
.
The system displays the Settings dialog box for the selected contact
layer. Initially the File(s) tab is in the foreground (Figure 10). This
window has no user-accessible parts to it; it just shows properties of the
current layer. Note that this dialog box is the only access path to the
Settings tab for vector layers.
Chapter 2: Icons and Display Tools 33