Asus P5B-VM DO - Manual (Page 47)

ASUS P5B-VM DO 1-35
6. JMicron JMB363 ® Serial ATA RAID connector (7-pin SATA_RAID1)
This connector is for a Serial ATA signal cable. This connector supports a
Serial ATA hard disk drive, which you can combine with an external Serial
ATA hard disk drive to configure for RAID via the unboard Serial ATA RAID
controller.
The JMicron controller mode item in the BIOS is set to [BASIC] by default.
When set to [RAID], this item allows you to use the connectors to build a RAID
set. See section “2.4.6 Onboard Device Configuration” for details.
Before creating a RAID set using Serial ATA hard disks, make sure that you
have connected the Serial ATA signal cables and installed Serial ATA hard disk
drives; otherwise, you cannot enter the JMicron ® JMB363 RAID utility and SATA
BIOS setup during POST.
7. TPM connector (20-1 pin TPM_SLOT)
This connector supports a Trusted Platform Module (TPM) system, which can
securely store keys, digital certificates, passwords, and data. A TPM system
also helps enhance network security, protects digital identities, and ensures
platform integrity. See section “2.4.3 TPM Configuration” for details.
R
P5B-VM DO
P5B-VM DO TPM connector
TPM
GN
D
smb_dk_mai
n
smb_data_mai
n
LAD2 LAD1 GN
D X
SERIRQ
X X
CK_33M_TPM LFRAME
n
LRESET
n
LAD3 +3.3V LAD0 +3.3V x GND LPC.PD
#
R
P5B-VM DO
P5B-VM DO SATA RAID connector
SATA_RAID1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND