Asus P5B-VM DO - Manual (Page 80)

2-26 Chapter 2: BIOS setup
vPro Technology Configuration
With the support of the Intel ® vPro ™ Technology, the items in this menu allow you
to configure the Intel ® Management Engine (ME) subsystem and enable the Intel Intel ®
Active Management Technology. Select an item then press <Enter> to display the Management Technology. Select an item then press <Enter> to display the
configuration options.
To enable the following functions, you must install the Intel install the Intel ® Management
Engine Interface. See page 3-3 for details.
vPro Technology Configuration
ASF Support [Disabled]
ME HECI Configuration
ME-HECI [Disabled]
Configure Intel AMT Parameters
Intel AMT Support [Disabled]
Options
Disabled
Enabled
When the Intel AMT Support item is set to [Enabled], the vPro Technology
Configuration menu will change into the following one.
ASF Support [Disabled]
Allows you to enable or disable the Alert Standard Format (ASF).
Configuration options: [Disabled] [Enabled]
ME HECI Configuration
ME-HECI [Enabled]
When set to [Enabled], Host Embedded Communication Interface (HECI)
provides an interface for the exchange of message between the host
software and the ME firmware. Configuration options: [Disabled] [Enabled]
ME-IDER [Disabled]
Allows you to enable or disable the IDE Redirection interface by which
the remote management console is able to direct the client PC to boot.
Configuration options: [Disabled] [Enabled]
vPro Technology Configuration
ASF Support [Disabled]
ME HECI Configuration
ME-HECI [Enabled]
ME-IDER [Disabled]
ME-KT [Disabled]
Configure Intel AMT Parameters
Intel AMT Support [Enabled]
Force SOL [Disabled]
Options
Disabled
Enabled