Vogels PFT 8810 - Manual (Page 6)

www.vogels.com 9532-010-Z01-00
1
3
2
4
14 13
15 16
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFT8810
x4 x4
5mm
17
x4 x4
5mm
Refer to the diagram on the previous page to find the proper
spacing for the cross bars. Once you have the proper clear-
ance height for placement of the second cross bar install,
level and secure the second cross bar to the main frame
with the four each M8 x 60mm button head Allen screws and
flat washers supplied.
Once all three cross bars are confirm level and secure in-
stall and secure the “end cap” stabilizer covers to the cross
bar ends with the four each M8 x 12mm button head Allen
screws supplied. Repeat the same measurement procedure for the upper
third level cross bar as you did for the second cross bar and
install, level and secure the third crossbar to the mainframe
with the four each M8 x 60mm button head Allen screws
supplied screws.